Non-compliant lighting products are reaching the market through online platforms such as Temu and Amazon. In Australia, recent testing by Lighting Council Australia (LCA) has put numbers to the problem, and a 7NEWS report from Queensland showed what some of those products do when they fail. Lighting Council New Zealand (LCNZ) and the wider industry are confident the same thing is happening here.
What the testing found
LCA assessed 131 lighting products sold online in Australia (many of which are available in New Zealand as well) against five regulatory frameworks covering electrical safety, electromagnetic compatibility (EMC) and energy efficiency. 73% did not comply.
The gap between channels was wide. None of the products sampled from Temu or AliExpress passed. Amazon’s pass rate was 8% and eBay’s was 12%. Specialist lighting retailers, on the other hand, recorded pass rates between 80% and 100%.
LCA then went a step further. It bought 28 of the failed products at random and inspected them, then sent three to an independent laboratory for safety testing. All three failed multiple mandatory requirements:
Every sample failed the resistance to heat and fire tests, with diffusers burning and dripping flaming material.
Every sample had creepage and clearance distances below the minimum, measuring as little as 0.738 mm where 1.5 to 2.5 mm is required.
Two broke down electrically below the 3.0 kV test voltage.
Two exposed live parts once a diffuser was removed by hand.
None of the three carried a model number, and two carried no manufacturer details at all. A product that cannot be identified cannot be traced or recalled.
LCA notes that its results reflect only the products sampled at the time of assessment. According to 7NEWS, the marketplaces were told about the results two months before the story aired, and Temu was the only platform to remove products from sale.
Why it matters in New Zealand
The laboratory tests were carried out against joint Australian/New Zealand standards, including the AS/NZS 60598 series for luminaires.
LCNZ reports numerous instances of luminaires, lamps and other lighting products being supplied into New Zealand directly from online platforms, and says most of them do not comply with the relevant New Zealand standards. Many of these platforms have no legal status here and no responsible operator based in New Zealand. Regulators carrying out market surveillance say they have no jurisdiction to pursue companies without a New Zealand legal base.
That leaves an open channel for products that sidestep electrical and fire safety, building egress, EMC, energy efficiency and consumer protection requirements.
Most of the products LCA tested were aimed at homes. However, the same principle applies on commercial and public projects: a luminaire is only as reliable as the evidence behind it.
Compliance for lighting installations in NZ is shared by the NZ manufacturer, importer or distributor of the luminaires and the installing electrician. The NZ based manufacturer, importer or distributor is required to provide a NZ Supplier Declaration of Conformity (SDoC) to verify the luminaires comply with the relevant NZ standards.
The installing electrician is required to provide an electrical Certificate of Compliance (CoC) to verify the installation complies with the AS/NZS 3000 Wiring Rules for which they require the supplier to provide SDoCs for the luminaires. We would expect the electrician to refuse to install luminaires when SDoCs are unable to be provided.
A shared responsibility
With non-compliant and potentially dangerous products this common, those of us who work in lighting design, specification and supply have a responsibility to be extra vigilant about the products we choose. We need to be confident that what we select adds no risk to the projects and homes we work on.
That makes it more important than ever for specifiers, and anyone else who selects lighting products, to understand the risks, know what to look for and be able to identify a safe, compliant product.
It is also very important to ensure specified compliant products are not substituted with inferior on-line (or any other) products for which compliance and the associated SDoC cannot be provided by a NZ based supplier.
What to ask your supplier when you specify
A good supplier expects these questions and can answer them quickly.
Who is the responsible supplier in New Zealand? Someone here should be accountable for the product’s compliance, and for supporting it if something goes wrong.
Can you show the complete luminaire complies? Ask for test reports or certificates against the relevant AS/NZS standards, and check the product is marked accordingly. A certificate for one component is not enough. One of the downlights LCA tested carried a genuine certificate number on its LED driver, yet the luminaire itself failed the insulation, high-voltage and fire tests.
Is the product clearly identified? The brand and model number should be marked on the product itself, not just on the listing or the box. That is what makes it traceable.
Can you back up the ratings you claim? IP and IC ratings should be supported by documentation. LCA found listings claiming IC-4 and IP44 ratings with nothing verifiable behind them.
What does the performance data say? Compliance tells you a product is safe to install. Performance data tells you whether it will do the job. Ask for:
L values (lumen maintenance), which show how much light output the luminaire retains over its rated life
SDCM (Standard Deviation Colour Matching) rating (MacAdam ellipse), which shows the colour consistency over time
CRI and R9, which show how accurately the light renders colour, with R9 covering saturated reds
If a supplier cannot provide this information, treat it as a warning sign.
How we work
We can provide compliance and performance documentation for every brand we carry. Our range comes from European and Australian manufacturers we select for quality, energy efficiency, aesthetics and sustainability, and our support does not end at handover.
We would rather project teams ask us these questions than not. If you want to check the documentation for a product you are considering, get in touch.
Read the full Lighting Council Australia 2026 Online Marketplace Compliance Report here.